Demonstration machines - available at short notice
Would you like to put our machines and capabilities to the test? We would be delighted to arrange a demonstration. We have our own demonstration machines available for this purpose. Come and see for yourself!We'll show you what we can do!
It is always a pleasure to welcome customers to Montabaur. However, it is most rewarding for us when we can demonstrate our capabilities, or at least how powerful our machines are in action. After all, what we offer is much more than meets the eye. Consider our services, for example, and the fact that with MTE, you have access to the expertise of our entire team.
Bed type milling machine BF 3200
Available now!
Universally applicable and flat guided
Travel distances:
X = 3,000
Y = 1,200
Z = 1,500
Control used:
Heidenhain TNC 7 with touchscreen
Built-in equipment:
- Clamping table 3,200 x 1,000 mm
- Automatic milling head 2.5° x 2.5° and 4,000 rpm
- Drive power 32 kW
- Torque 1,520 Nm
- 40-fold tool changer
- Internal coolant supply
- Radio dial gauge
- Chip conveyor: 2 longitudinal and 1 transverse
- Full cabin, open at the top
Bed type milling machine BT 3700-T
Available now.
The machine is ready for action! Milling and turning!
Linear guided and flexible
Travel distances:
X = 3,500
Y = 1,300
Z = 2,000
Control system used:
Heidenhain TNC 7
Built-in equipment:
- Clamping table 3,700 x 1,200 mm
- Automatic milling head 0.01° x 0.01° and 6,000 rpm
- Drive power 43 kW (inline direct drive)
- Torque 917 Nm
- Spindle clamping for turning tools Capto C6
- Integrated carousel rotary table Ø 1,200 mm
- 60-fold tool changer
- Full cabin closed at the top
- Radio speed sensor
- Internal coolant supply
- Chip conveyor: 2 longitudinal and 1 transverse
Floor type milling machines FBF-M 6000 - 12000
Available now.
Ähnliche Abbildung
The universal machine
Travel distances:
X = 6,000 - 12,000 (selectable)
Y = 3,200
Z = 1,600
Control system used:
Heidenhain TNC 7
Installed equipment:
- Automatic milling head (diagonal) 0.01° x 0.01° and 6,000 rpm
- Drive power 43 kW
- Torque 917 Nm
- Automatic milling head changing system
- Milling and drilling spindle Ø 198 mm, 500 mm
- Automatic pick-up station, 3 storage locations
- 60-fold tool changer
- Radio probe
- Preparation of chip conveyor
- Enclosure according to customer requirements
- Pendulum machining
- Internal coolant supply
- Preparation of rotary transfer table
Fixed table travelling column milling machine SB-M 8000
Available from mid-November 2025!
Starrbettfräsmaschine SB-M 8000
Infinitely stable
Travel distances:
X = 6,500
Y = 2,000
Z = 1,500
Control system used:
Heidenhain TNC 7 with touchscreen
Built-in equipment:
- Clamping table 8,000 x 1,300 mm
- Integrated rotary table Ø 1,300 mm with 4 t transport load
- Automatic milling head 0.01° x 0.01° and 6,000 rpm
- Drive power 43 kW
- Torque 917 Nm
- 60-fold tool changer
- Internal coolant supply
- Two chip conveyors
- Enclosure with floor mounting
- Second control pendant on the front
- ECO energy-saving mode
